Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 11-06-2008, 01:18 PM
MRX37 MRX37 is offline
VideoKarma Member
 
Join Date: Aug 2005
Posts: 1,579
You can add JVC 2004 sets to the junk pile...

Found a nice JVC TV, made in 2004. The CRT is nearly dead. Even with the G2 voltage set as high as it'll go and the brightness/contrast maxed out, the picture is still dim, has a blue tint, and the convergence is already failing.

Looks like Zenith's bad CRT formula spread to JVC...
Reply With Quote
  #2  
Old 11-06-2008, 01:32 PM
waltchan waltchan is offline
VideoKarma Member
 
Join Date: Aug 2005
Posts: 571
Quote:
Originally Posted by MRX37 View Post
Found a nice JVC TV, made in 2004. The CRT is nearly dead. Even with the G2 voltage set as high as it'll go and the brightness/contrast maxed out, the picture is still dim, has a blue tint, and the convergence is already failing.

Looks like Zenith's bad CRT formula spread to JVC...
The CRT screen is made by Zenith? I thought most JVCs use Panasonic picture tubes.
Reply With Quote
  #3  
Old 11-06-2008, 01:38 PM
zenith2134's Avatar
zenith2134 zenith2134 is offline
VideoKarma Member
 
Join Date: Feb 2005
Location: UTC -4
Posts: 2,546
In 2004? Doubt it would actually say Zenith on it. And even if it did, it would either say 'made in Malaysia' or 'made in South Korea' somewhere on the bell. JVC! NIVICO! I used to be a big fan.

Hey MRX, looks like you're about to break 1500 posts!
Reply With Quote
  #4  
Old 11-06-2008, 01:52 PM
freakaftr8's Avatar
freakaftr8 freakaftr8 is offline
Convergence freak!
 
Join Date: Sep 2007
Location: Folsom, CA (no not in the prison)
Posts: 1,778
What MRX37 was saying is that Zenith CRT's of the mid 90's up and the JVC CRT's are both junk. I dont think there were Zenith tubes in the JVC units (at least as far as I know of).

Quote:
Originally Posted by waltchan View Post
The CRT screen is made by Zenith? I thought most JVCs use Panasonic picture tubes.
__________________
Honey, turn on the tv.. I'm cold!
Reply With Quote
  #5  
Old 11-06-2008, 02:31 PM
MRX37 MRX37 is offline
VideoKarma Member
 
Join Date: Aug 2005
Posts: 1,579
Quote:
Originally Posted by freakaftr8 View Post
What MRX37 was saying is that Zenith CRT's of the mid 90's up and the JVC CRT's are both junk. I dont think there were Zenith tubes in the JVC units (at least as far as I know of).
No, the CRT has a JVC label on it.

What's funny is that a similar JVC model from 2001 still has half decent CRT in it, also with a JVC label...
Reply With Quote
Audiokarma
  #6  
Old 11-06-2008, 04:41 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
I had a JVC of the same vintage with a bad CRT. The set came to me with some open surface mount resistors on the CRT neck board. I hung on to the set and eventually found a little older JVC with a burnt up chassis that used the same tube. I did a tube swap and all was well. BTW, my JVC was very cheap made.

I've got a couple 27" JVC's from the early to mid '90's that I have not even opened yet. They should be OK since they are from the '90's.
Reply With Quote
  #7  
Old 11-06-2008, 05:13 PM
freakaftr8's Avatar
freakaftr8 freakaftr8 is offline
Convergence freak!
 
Join Date: Sep 2007
Location: Folsom, CA (no not in the prison)
Posts: 1,778
Typically when the crt goes south it probably starts to intermittantly short. I had a Hitachi PC monitor do the same.. It eventually took out the flyback!
__________________
Honey, turn on the tv.. I'm cold!
Reply With Quote
  #8  
Old 11-06-2008, 06:10 PM
Nakdoc Nakdoc is offline
nakamichi spoken here
 
Join Date: Oct 2005
Location: Nashville, TN
Posts: 47
JVC has 2 lines, the cheap stuff and the good stuff. We are an ASC for JVC and the only tube we've had repeat problems with are flat 32" sets.
__________________
A stereo can work and it can play.

SOTA Sapphire, Lustre arm, AKG mc
Yamaha C85 , C1
Carver TX-11a
Kenwood L-07MmkII , Yamaha B1 + UC1
DCM Time Windows ADS 200 IMF TLS80
Revox B77 Nak 680 pioneer CLD97
Reply With Quote
  #9  
Old 11-06-2008, 06:23 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
The one I had was a 27" "D series" set.
Reply With Quote
  #10  
Old 11-09-2008, 06:22 AM
Greg B. Greg B. is offline
AK Donor
 
Join Date: Dec 2006
Location: Dartmouth, Nova Scotia, Canada
Posts: 45
Quote:
Originally Posted by radiotvnut View Post
The one I had was a 27" "D series" set.
I bought one of those in 2001. I was a little suspicious because they replaced a previous line and had a lower price point while offering more features. But it worked well for me except for an annoying buzz from one of the speakers, fixed by opening it up and tightening one of the mounting screws. It is now mostly retired and in the basement since I bought a big screen a couple of years ago. Here's what it looks like (not my set, but identical):

__________________
Pioneer SX-3900, SX-3800, SX-3600, SX-880, PL-S40, PL-2, H-R 100
Akai GXC-710D, AP-206
Yamaha P-200
Marantz SD-3030
PSB Mod. 40 MkII
Reply With Quote
Audiokarma
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:49 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.