![]() |
|
#1
|
|||
|
|||
|
Disarming CRT
I know this has been covered before but with the new server I didn't get any results.
What is the safest way to kill the vacuum in a CRT. Thanks Jim |
|
#2
|
||||
|
||||
|
Use ice pick (sharp pointed inst) and pierce the soft iron bottom of the high voltage anode, safest way, worked for Philips Consumer Electronics for 12 years and this was the only approved way of airing a CRT.
|
|
#3
|
|||
|
|||
|
I normally just break of the exhaust tip with a pair of wire cutters.
|
|
#4
|
||||
|
||||
|
We didn't want any glass particles, clip the tip and glass will fly, you had better have safety glasses on when you do it. The rules for safety are why we punctured the anode, had a guy in a prototype lab who used to air tubes by kicking the neck, that is till he took a bad shot at one and sliced his leg open, after that they used to call me to the lab with my ice pick.
|
|
#5
|
||||
|
||||
|
Hammering anywhere near the CRT sounds a bit scary to me. I usually place the CRT in a cardboard box large enough to enclose everything but the very end of the CRT, and fold the box flaps around the neck. Then I snip/break the exhaust tip.
That's the way my uncle Art (Margolis) taught me.
__________________
From Captain Video, 1/4/2007 "It seems that Italian people are very prone to preserve antique stuff." |
| Audiokarma |
|
#6
|
||||
|
||||
|
Safest way
The safest way if you have not done this before is to have an experienced person do it for you.
__________________
Barrymore's Conclusion. The thing that takes up the least amount of time and causes the most amount of trouble is sex . |
|
#7
|
|||
|
|||
|
You guys are a bunch of pantswetters.....I just strip down to my skivvies, grease up (to catch and glass shards), grab the tube under one arm (like a stranglehold) and body slam it to the ground like a wrestler.
BOOM! Usually makes me bounce up about a foot or so! Great fun! And if you thought that I was serious for even a second and decide to actually do that, then you deserve what happens! LOL Anthony |
|
#8
|
||||
|
||||
|
I bet it would be jolly fun to sling one in a trebuchet-as long as you weren't on the receiving end. I have put numerous old TVs outta their misery using everything from rocks (not recommended) to 7.62 NATO rounds (loud, but effective). 22LRs aren't recommended, as sometimes they ricochet, which is another problem in itself. A hot .38 special hollowpoint will do the trick, too. Just be sure & clean up the mess you make.-Sandy G.
|
|
#9
|
|||
|
|||
|
Ah yes..
I have fond memories of going to the sanitary land fill (we, of course, called it a dump) to shoot rats and other critters. Finding intact CRTs was a great bonus |
|
#10
|
||||
|
||||
|
Quote:
Many such fun activites as a youth are now considered brain dead type conduct but we sure had our fun didn't we!... Come to think of it, seems I've heard the spirit is still alive in some youths using home video shots then submitted to TV shows? Oh well PC and OSHA has probably won over the majority about such activities. I'm glad I grew up in a period where I guy sometimes just had to do what a guy has to do. We never heard about the Darwin award Lefty
__________________
Lefty: Cables? I don't got to show you no stinkin' cables 038° 00' 58.68" -122° 15' 39.54" 134.84 ft |
| Audiokarma |
|
#11
|
||||
|
||||
|
Oh, yeah ! It was a big fun big treat to get yr dad to take you & yr trusty .22 & a couple boxes of shells to the local Dump...around here, the city fathers didn't mind if you let 'em know you were gonna do it-they didn't mind how many rats or other critters you dispatched. Lotsa fun just pokin' around in the dump-sometimes Dad would actually let you bring home a treasure or 2 you found...Mama didn't much care for it, though.Now, IF they'd let you do that, you'd prolly have to fill out 17 reams of forms, take hazmat training...Another one of life's little pleasures gone. I fooled around the local dump umpteen times when I was a kid, never got so much as a skint knee.-Sandy G.
|
|
#12
|
|||
|
|||
|
Newsflash Reuter Wire
For immediate release: O.S.H.A. Washington D.C. In response to a dangerous lunatic fringe which has been imploding old television picture tubes, this agency has now entered into a reciprocal agreement with NASA in which all retired picture tubes will be transported into a low orbit and will there have their seals violated. It has been determined that while this program may be expensive, it will be cheaper than the overall economic impact upon the country from loss of work due to possible injuries resulting from the average citizen attempting this under uncontrolled conditions. Besides, it gives Haliburton something to do in case Kerry gets elected. |
|
#13
|
||||
|
||||
|
Well, Jim, how DID you finally disarm yr CRT? Lotsa good & not-so-good suggestions here. But you COULDA had a lot of mean, nasty fun !! -Sandy G.
|
|
#14
|
|||
|
|||
|
Well. along the lines of the great suggestions here. I was going to lob a hand granade at it but local law enforcement advised against it. So I'm thinking since this is a console I would cut a small hole in the tube extension on the back panel large enough to swing a ball peen hammer. I would think this would keep imploding parts inside the cabinet. What do youse thinks?
Jim |
|
#15
|
||||
|
||||
|
I would assume you don't care about the set, as you risk having the fairly heavy yoke come crashing down onto the chassis.....
You're making an aquarium aren't you!
__________________
From Captain Video, 1/4/2007 "It seems that Italian people are very prone to preserve antique stuff." |
| Audiokarma |
![]() |
|
|