Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 08-11-2008, 06:08 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Zenith 17JC55 Chromacolor II

I went to the Salvation Army today looking for old junk. I was quickly overcome with disappointment over all the '80's consoles (more than last time), computer monitors, an '80's GoldStar 13" knob tuner, and BPC stereo equipment. I did see a mid '80's 19" GE PC chassis set; but, I didn't really give it a second look. Just as I was getting ready to leave, I saw a TV peeping out from under a computer monitor and other junk. I quickly discovered that it was a 17" Zenith CCII in what looked to be decent condition! There was no price on it so I lugged it up to the counter and asked the price. The guy thought a minute and said $10. I told him that I liked older TV's and he pointed out the PC chassis GE set and said they were just before throwing it away. He said the cord had been cut and they had no way to test it. I asked what he wanted and he thought for a few seconds. I said "what about $5." He thought some more. I said "that's better than throwing it out." He said OK and I loaded it up. I'll go into more detail with the GE in another thread.

This Zenith is a '77 model and was built in Missouri. It uses an inline CRT but it has a different style socket than what the System 3 tube has. The set had no color and a crappy B&W picture. I borrowed a chroma module out of another set and got color back but the picture was still not that great. The red gun was weak and the other two were good but took longer to come up. I "cleaned and balanced" the red and left the other two alone. The picture is still a little soft and is too red until it warms up. I guess I need to track down a 17V inline Zenith tube in case this one craps out.

This is now the new bedroom TV, replacing a 13" KTV.
Attached Images
File Type: jpg zenith 001.JPG (54.7 KB, 33 views)
File Type: jpg zenith 002.JPG (68.9 KB, 35 views)
File Type: jpg zenith 003.JPG (76.4 KB, 40 views)
File Type: jpg zenith 004.JPG (64.2 KB, 28 views)
Reply With Quote
  #2  
Old 08-11-2008, 06:10 PM
andy andy is offline
VideoKarma Member
 
Join Date: Jul 2002
Posts: 4,004
...

Last edited by andy; 12-06-2021 at 11:08 AM.
Reply With Quote
  #3  
Old 08-12-2008, 12:24 PM
kx250rider's Avatar
kx250rider kx250rider is offline
REAL TVs have TUBES!
 
Join Date: Oct 2005
Location: Los Angeles & Dallas
Posts: 3,239
Come to think of it, I can't think of any 17" SysIII's I've seen, nor any 17" inline Chro II's... I guess they were rare. I've seen quite a few 17" delta gun Chro II sets, ranging from the first chassis to the last one (as this one above). Now I can't remember ever seeing a 13" delta gun in a Chro II, but I've seen a lot of 13" Chro II with inline.

Great sets!

Charles
__________________
Collecting & restoring TVs in Los Angeles since age 10
Reply With Quote
  #4  
Old 08-12-2008, 12:37 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
I've seen one 17" system 3. It was a space command set and used the 9-160 sweep module. The tuner was the varactor type with 14 positions that could be set to whatever channel you wanted.

My set does not have any type of convergence circuit. It has the ring magnets on the CRT neck for purity and convergence.
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:11 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.