Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 08-18-2007, 08:20 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Question about Magnavox 4 lead safety cap 250663-19

Howdy,
I have a 19" touch tune Magnavox set that uses a T809 chassis with that pesky grey safety cap that shorts. I found a very used cap in my junk that got the set playing for a couple of hours. Then, that one shorted. I've looked in all my TV parts catalogs for this part without success. I've heard that these Magnavox caps were unreliable and are a common problem. I was wondering if anyone has had any luck replacing this four leg cap with something more reliable that is easier to obtain. The part number is 250663-19 and the value is: .0195 uF, 1.2kv, 5%. The cap is connected from the HOT collector to ground. This set had a nice picture when I had it going and I'd like to keep it as a spare TV (at least until a 4-tube hybrid Zenith comes along).

Thanks for your help.
Reply With Quote
  #2  
Old 08-18-2007, 10:21 PM
andy andy is offline
VideoKarma Member
 
Join Date: Jul 2002
Posts: 4,004
A regular 2 lead cap will work. You should be able to find that value, or make it by putting several caps in parallel.
Reply With Quote
  #3  
Old 08-19-2007, 12:54 AM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Thanks for the advice! I was thinking I could use a regular 2 leg cap (or caps) to replace the original 4 leg cap. But, I figured I'd run it past you guys first. I'll check around for a modern disc or orange drop to use as a replacement.
Reply With Quote
  #4  
Old 08-29-2007, 11:59 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Got the caps installed today and it fired up with a nice picture. I used two current production Sprague orange drops. Should be more reliable than the original Magnavox part. This set is a '79 model. Would that have been prior to Philips buying Magnavox?
Reply With Quote
  #5  
Old 08-30-2007, 11:24 AM
bgadow's Avatar
bgadow bgadow is offline
VideoKarma Member
 
Join Date: Oct 2003
Location: Federalsburg, MD
Posts: 5,865
I think Philips came into play around '75, though there has been some debate about that.
__________________
Bryan
Reply With Quote
Audiokarma
  #6  
Old 08-30-2007, 12:46 PM
Findm-Keepm's Avatar
Findm-Keepm Findm-Keepm is offline
Followin' the Rules...
 
Join Date: Jun 2007
Posts: 2,857
Philips acquired Magnavox in late 1974. 1st purchase offer was in August 1974. Philco/Sylvania(GTE) purchase came in 1981.

Philips established PolyGram in 1972, and acquired Magnavox (1974) and Signetics (1975) in the United States. Acquisitions in the 1980s included the television business of GTE Sylvania (1981) and the lamps business of Westinghouse (1983). The Compact Disc was launched in 1983, while other landmarks were the production of Philips' 100-millionth TV set in 1984 and 300-millionth Philishave electric shaver in 1995.


Cheers
__________________
Brian
USN RET 22YRS (Avionics/Cal)
CET-Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"

When fuses go to work, they quit!
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:42 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.