![]() |
|
|
|
#1
|
||||
|
||||
|
video disc player (CED) problems
I finally found some discs for my CED video disc player, RCA model SFT100W. What it does is play the disc for about 30 seconds, then get stuck, move backwards for a while, then start playing it again until it gets to the same point in the disc, then get stuck and go backwards again, and do it over and over. It does this on all the discs I tried, and I tried about 10, so I don't think the problem is due to bad discs. The rewind and pause functions work, but when I try the fast foward, it moves foward for just a few seconds, then gets stuck.
I found this in the back lot of a used electronic parts store, where it had been sitting outside at the bottom of a heap of junk for probably decades. It was being rained on, as the shifting of the piles of stuff had recently exposed it. The fact that it still works this well I think speaks highly of the quality of these units. Anyway, if anyone who knows these things can point me in the right direction thanks alot. I am hoping to watch the discs on my ctc-15, as the mixture of two seldomly seen anymore devices such as these really appeals to me. Although I suppose watching it on the system 3 would be more accurate as to what these were originally watched on. |
|
#2
|
||||
|
||||
|
Could be anything from a bad stylus, a bad belt or even servo probs. I replaced a stylus in a stereo model back in the 70's and seem to remember the platter and linear tracking arm being belt driven. Dang! That was nearly thirty years ago!
__________________
Let me live in the house beside the road and be a friend to man. |
|
#3
|
|||
|
|||
|
Dang!
Since the problem repeats, I'd blame the arm slider. Needles are cheap and available. I might even have a manual.
__________________
A stereo can work and it can play. SOTA Sapphire, Lustre arm, AKG mc Yamaha C85 , C1 Carver TX-11a Kenwood L-07MmkII , Yamaha B1 + UC1 DCM Time Windows ADS 200 IMF TLS80 Revox B77 Nak 680 pioneer CLD97 |
|
#4
|
||||
|
||||
|
On several of these machines we have found the belts disintegrated and left a tarry substance all over the pulleys...cleaning with isopropyl alcohol (very messy) and new belts fixed the ones we worked on.
|
|
#5
|
||||
|
||||
|
A belt goes bad and the stylus doesn't move, or doesn't move far, and so it just keeps repeating that same section. That's what happened with mine. I still don't have it right, as it skips a lot. The belts I have are not really right.
__________________
Bryan |
| Audiokarma |
|
#6
|
||||
|
||||
|
Quote:
However, if your player is skipping a lot (almost always in a forward direction, not just jumping backwards and repeating the same small segment) and has generally 'noisy' video-- *and* it happens on all discs-- then I'd tend to suspect the stylus. My first CED player was a Hitachi-made Sears model that had a rather worn stylus when I got it. I didn't have a replacement stylus for it, but there was a trimmer pot on the "arm" that controlled the pre-amp gain; turning that up greatly reduced the skipping and reduced video noise, but that was a temporary solution. I've noticed though that some discs just seem to skip a *lot* the first time they're played in a long while. On subsequent plays, though, they'll work fine with few or no skips. [The CED Magic site (www.cedmagic.com) refers to this phenomenon as "video virus" on its FAQ page.] |
|
#7
|
|||
|
|||
|
It sounds like the arm is getting stuck, or never moving at all. The arm is moved by a servo mechanism (like a linear tracking turntable). It could be a problem with that circuit, the motor that moves the arm, a belt, a gear, or something obstructing it. It might even be rust, or lack of lubrication.
|
|
#8
|
||||
|
||||
|
Take a look at http://www.cedmagic.com/selectavision.html
Ever wonder why the CED system bombed, but DVD was successful? |
|
#9
|
||||
|
||||
|
Quote:
Ooh! DVD discs and players are very affordable too!
__________________
Let me live in the house beside the road and be a friend to man. Last edited by Celt; 05-04-2006 at 09:46 PM. |
|
#10
|
||||
|
||||
|
Quote:
Last edited by Pete Deksnis; 05-05-2006 at 09:02 AM. |
| Audiokarma |
|
#11
|
||||
|
||||
|
IMO, DVD succeeded because:
1. The medium is physically light, compact and kinda familiar (looks like a CD) 2. Marketing, Marketing, MARKETING!!! 3. People finally started to realize that, for the most part, they weren't really re-playing their VHS recordings anyhow. (So why not just rent movies?) 4. For the few rare TV shows worth recording, we now have TIVO! |
|
#12
|
||||
|
||||
|
AHHH THE GOOD OLE DAYS. i sold about four or five hundred of those ced players at least. we rented the disc and on fridays you could not walk in the store for the people. we mand a lot of money off of the ced systems a lot. we are in a small town of about 2500 people. by the way the first model sold for $400.00 then at the end we were selling them at cost so we could rent the dics i believe $159.00 rented the disc for $3.00 each for 3 days. steve
|
|
#13
|
|||
|
|||
|
Don't forget about Analog laser disk a better system and it bombed as well.
|
|
#14
|
||||
|
||||
|
Quote:
__________________
Let me live in the house beside the road and be a friend to man. |
|
#15
|
|||
|
|||
|
Quote:
|
| Audiokarma |
![]() |
|
|