Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 01-09-2015, 05:53 PM
mcmlxv's Avatar
mcmlxv mcmlxv is offline
VideoKarma Member
 
Join Date: Jan 2012
Posts: 17
1965 Westinghouse Attache Twelve NIB

I just picked up this Westinghouse portable. It's from the estate of a Sears sales rep. The set was made in Japan and contains an interesting mix of USA-made WH and Japan-made Hitachi tubes date coded 1965. The CRT is Mitsubishi-built. The set has a nice picture, and the little speaker really performs.

The set was found new, sealed in its box. The picture it's producing below is a YouTube feed from my computer. No amount of adjustment eliminates the distortion on the right side of the screen. But I'm leaving I alone. The issue isn't so bad that I want to compromise its originality. And boy does it run hot.

[ATTACH]185358[ATTACH]

WP_20150109_004.jpg

WP_20150109_007.jpg

WP_20150109_006.jpg

WP_20150109_009.jpg[/ATTACH]
Attached Images
File Type: jpg WP_20150109_005.jpg (40.0 KB, 97 views)
__________________
We think it's a better way to build television.

Last edited by mcmlxv; 01-09-2015 at 06:39 PM.
Reply With Quote
  #2  
Old 01-09-2015, 06:16 PM
dishdude's Avatar
dishdude dishdude is offline
VideoKarma Member
 
Join Date: Feb 2014
Posts: 841
Now that is a cool find!
Reply With Quote
  #3  
Old 01-09-2015, 07:27 PM
magnasonic66's Avatar
magnasonic66 magnasonic66 is offline
VideoKarma Member
 
Join Date: Jun 2009
Posts: 330
That is so cool!! It even picks up old TV broadcasts, Gloria Swanson on To Tell The Truth!
Reply With Quote
  #4  
Old 01-09-2015, 08:05 PM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
Neat set! I guess by the mid 60's they changed their slogan to "You can't be sure if its REALLY a Westinghouse"...
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
  #5  
Old 01-09-2015, 08:39 PM
mcmlxv's Avatar
mcmlxv mcmlxv is offline
VideoKarma Member
 
Join Date: Jan 2012
Posts: 17
Quote:
Originally Posted by Electronic M View Post
Neat set! I guess by the mid 60's they changed their slogan to "You can't be sure if its REALLY a Westinghouse"...
I was surprised that it was Japan-made. I though WH offshored a little later. Even so, it's obvious Westinghouse was the dominant partner. The only evidence of Japanese parts is the Hitachi sun logo on some tubes and the three diamond Mitsu logo on the CRT label and yoke. The names of the parent companies are absent.
__________________
We think it's a better way to build television.
Reply With Quote
Audiokarma
  #6  
Old 01-10-2015, 10:17 AM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by mcmlxv View Post
I was surprised that it was Japan-made. I though WH offshored a little later. Even so, it's obvious Westinghouse was the dominant partner. The only evidence of Japanese parts is the Hitachi sun logo on some tubes and the three diamond Mitsu logo on the CRT label and yoke. The names of the parent companies are absent.
The set's Mitsubishi built.
IIRC, there was a manufacturing agreement between Westinghouse and Mitsubishi, even with the large electrical equipment line.

BTW, I wonder how many people younger than me can decipher Roman numerals. My year is MCMXLIV.
Reply With Quote
  #7  
Old 01-10-2015, 12:05 PM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by Electronic M View Post
Neat set! I guess by the mid 60's they changed their slogan to "You can't be sure if its REALLY a Westinghouse"...
I have a Westinghouse pre-war table radio, that was built by Stromberg-Carlson. Even the paper caps are marked with their name.
Some of the refrigerator radios were built by Wells-Gardner.
Reply With Quote
  #8  
Old 01-10-2015, 03:49 PM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
MGA CRT & yoke probably all MGA built. I dont remember
seeing these, just the W built ones that looked the
same on the outside. Look for the three diamonds on
the main PCB. The set looks better built than the other Jap tube sets
so probably all MGA.

73 Zeno
Reply With Quote
  #9  
Old 01-14-2015, 06:34 PM
mcmlxv's Avatar
mcmlxv mcmlxv is offline
VideoKarma Member
 
Join Date: Jan 2012
Posts: 17
I just wanted to take a minute and thank everyone for their kind responses. I've put a few hours on the set over the last few days and I love it. I have it hooked up to a generic Chinese ATSC/NTSC converter that includes a USB port on the front panel. Using this box with an antenna, the picture fills the entire screen. I can also rip video files onto a USB thumb drive and watch that way too. Unfortunately, there's a significant buzz that I can't seem to eliminate. Any suggestions would be welcomed.

When I have more time, I'm going to dive deeper into the set and see if I can find any more markings that would clue me in to the manufacturer. I agree that it's probably Mitsubishi.

And Dieseljeep, I'm going with 1944.
__________________
We think it's a better way to build television.
Reply With Quote
  #10  
Old 01-14-2015, 07:28 PM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by mcmlxv View Post
I just wanted to take a minute and thank everyone for their kind responses. I've put a few hours on the set over the last few days and I love it. I have it hooked up to a generic Chinese ATSC/NTSC converter that includes a USB port on the front panel. Using this box with an antenna, the picture fills the entire screen. I can also rip video files onto a USB thumb drive and watch that way too. Unfortunately, there's a significant buzz that I can't seem to eliminate. Any suggestions would be welcomed.

When I have more time, I'm going to dive deeper into the set and see if I can find any more markings that would clue me in to the manufacturer. I agree that it's probably Mitsubishi.

And Dieseljeep, I'm going with 1944.
You are so right, regarding my year of birth, December, 1944. Franklin Roosevelt was the President.
Reply With Quote
Audiokarma
  #11  
Old 01-14-2015, 08:28 PM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
Quote:
Originally Posted by mcmlxv View Post
I just wanted to take a minute and thank everyone for their kind responses. I've put a few hours on the set over the last few days and I love it. I have it hooked up to a generic Chinese ATSC/NTSC converter that includes a USB port on the front panel. Using this box with an antenna, the picture fills the entire screen. I can also rip video files onto a USB thumb drive and watch that way too.
Never seen one witha USB port before, Sounds like an interesting converter box.
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
  #12  
Old 01-16-2015, 02:37 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
Quote:
Originally Posted by mcmlxv View Post
... Unfortunately, there's a significant buzz that I can't seem to eliminate.
Does that buzz get worse when there are bright white areas on the screen? If so, what is likely happening is that the set's IF strip is going into cutoff when the video carrier is at its lowest level (which happens at peak white). And maybe a tube, or some biasing circuit, is clipping the IF signal so it goes completely away. And in intercarrier sets, where the video IF beats against the sound IF at the video detector to get the 4.5MHz sound subcarrier. But if the video carrier disappears momentarily, the sound subcarrier also disappears. Which makes "holes" in the sound, thus the buzz.

One workaround is to reduce the amplitude of the video signal going into the RF modulator inside your ATSC converter box. This would allow a larger amount of carrier signal to be produced on peak white, and hopefully enough of the carrier reaches the set's video detector to avoid the holes in the sound subcarrier.

Or dig into the set's IF strip circuits.
__________________
Reply With Quote
  #13  
Old 01-09-2015, 08:55 PM
Olorin67 Olorin67 is offline
VideoKarma Member
 
Join Date: Feb 2014
Location: Milwaukee
Posts: 927
I think a lot of companies that otherwise built their own sets started outsourcing small less profitable things like portables in the mid 60's. by the late 60's most 12" and under sets were imports I think.
Reply With Quote
  #14  
Old 01-09-2015, 10:10 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
It looks a little bit like this radio that looks a little like a TV set. The marketing dept must have been a wild place to work back then...
__________________
Reply With Quote
  #15  
Old 01-09-2015, 10:18 PM
dishdude's Avatar
dishdude dishdude is offline
VideoKarma Member
 
Join Date: Feb 2014
Posts: 841
It does look like that funky clock radio! Was the Westinghouse TV and Radio division headquartered in Pittsburgh?
Reply With Quote
Audiokarma
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:49 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.