Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 11-20-2013, 11:53 PM
Diode's Avatar
Diode Diode is offline
VideoKarma Member
 
Join Date: Nov 2013
Location: New York
Posts: 10
Seeking advice on a found Chromacolor I

Hello All,
I'll start off by saying that I am a newbie here, and although I am a student of electrical engineering, I will readily admit that I have relatively little knowledge about what I am working with here.

I recently came across an old 16" Zenith Chromacolor at a local tech dump, and I figured it would be a good idea to run it past some folks with a bit of knowledge on the subject of vintage televisions before something potentially worth saving got trashed. If it is a set of any value, my eventual goal is to test the set to see if it is still working and then work to find a home for it.

In terms of initial impressions, I would be tempted to say that the condition was decent, were it not for some strong indications that it came from a smoking environment. That said, looking in back, all the parts and original tubes seem to be there, so I would give it a reasonable chance that there is still some life left in it. I plan on putting it up on a variac and giving it a slow start up over the weekend. Assuming I can get it to at least turn on, though, how would you folks recommend I test the picture/reception? Are there any analog stations that I might be able to pick up these days?

Furthermore, regardless of whether I can get it working, is it even worth saving at all, even for parts? Basically speaking, what should I do with this now that I have it? Sadly, although the history and design of old tech fascinates me, I really don't have the room to hold onto something like this, so unless I can find a suitable home for it, I will be forced to take it back to the dump.

Any information or advice you might be able to give me, no matter how basic it might seem, would be greatly appreciated. Especially with regards to testing, any advice you might be able to give so that I can minimize the risk of damaging the set would be invaluable.






Last edited by Diode; 11-21-2013 at 01:40 AM. Reason: typo
Reply With Quote
  #2  
Old 11-21-2013, 12:26 AM
Eric H's Avatar
Eric H Eric H is offline
Administrator
 
Join Date: Jun 2002
Location: So. Calif
Posts: 11,565
Hello and welcome to VK!

That is a very cool find, color portables from this era are hard to find in good condition.
What size screen is it? can't tell perspective from the Photo but I'm guessing 14"-15"?
It's new enough that I would probably just plug it in and see if it works, watching closely for smoke.

Since you have a Variac available to you then that would be a wiser choice but you don't need to spend the whole weekend bringing it up, 30 minutes would be more than enough. I monitor the amperage as I ramp up the voltage and as long as it stays below an amp or two I just keep cranking it up until I hit 115.

Being a Zenith from the 60's I would guess it'll at least turn on and give a raster.

Please don't return it to the dump, if you decide you don't want it I have no doubt someone here would be happy to take it off your hands!
Reply With Quote
  #3  
Old 11-21-2013, 01:25 AM
Diode's Avatar
Diode Diode is offline
VideoKarma Member
 
Join Date: Nov 2013
Location: New York
Posts: 10
Eric,
Thanks for the quick reply. It is a 16" screen. I wasn't actually planning on taking the entire weekend to bring it up so much as I was stating that the weekend was when I would have time to do it. I'll probably ramp it up over an hour or two, just to be safe.

If this is something that people might want, though, I will definitely consider passing it along to one of the members here at some future date. The entire reason I pulled it out was on the hope that someone might want it.
Reply With Quote
  #4  
Old 11-21-2013, 02:13 AM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Nice find and I think this one is from around '73-'74. If it were mine, I'd fire it up at full line voltage. Being a Zenith, it could very well still work just fine.
Reply With Quote
  #5  
Old 11-21-2013, 02:27 AM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
Welcome from a fellow EE student.

I've got one of the CCI consoles running right now, and it has been a daily driver set for around 5 years. They are great sets, well worth saving from the dump. There is not a whole lot of collector value for them though. You can probably get 10-50$ for it depending on condition, who wants it and who is close.

As for signals there are options. There may be analog LP stations near you, but if not DTV converter boxes, cable/sat boxes with RF outputs, VCRs, DVD players and older video game consoles all are potential signal sources for your set.

If no body else steps up to the plate I might just give that set a home(I have a big soft spot for Zenith products).

BTW what is the set next to it?
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
Audiokarma
  #6  
Old 11-21-2013, 06:50 AM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
Be a shame to dump it, portables seem to be rare probably
cause there easy to get rid of. Also this one is a chromacolor CRT
& has high focus voltage like large sets. Probably a C or D
line set, apx 72-73. Replaced by a 17" solid state in '74.

73 Zeno
Reply With Quote
  #7  
Old 11-21-2013, 01:11 PM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by Electronic M View Post
Welcome from a fellow EE student.

I've got one of the CCI consoles running right now, and it has been a daily driver set for around 5 years. They are great sets, well worth saving from the dump. There is not a whole lot of collector value for them though. You can probably get 10-50$ for it depending on condition, who wants it and who is close.

As for signals there are options. There may be analog LP stations near you, but if not DTV converter boxes, cable/sat boxes with RF outputs, VCRs, DVD players and older video game consoles all are potential signal sources for your set.

If no body else steps up to the plate I might just give that set a home(I have a big soft spot for Zenith products).

BTW what is the set next to it?
That's the back cover from the set!
I have one like it in my stash. IIRC, it originally came from Doug.
Reply With Quote
  #8  
Old 12-18-2013, 10:20 PM
drh4683's Avatar
drh4683 drh4683 is offline
VideoKarma Member
 
Join Date: Jan 2003
Location: Chicago, IL
Posts: 2,094
This is a great TV. It's a 14DC15 chassis, introduced in 1973 and last offered in 1975. The '75 models I've seen were all produced sometime in 1974 however, I've yet to find a 14DC15 built in '75. That being said, this would be the last of the "mostly tube" hybrid chassis, while the legendary 4 tube hybrid would remain as Zenith's very last tube chassis in production until mid 1975. The model# of your set is either D3721 (1973), E3721 (1974) or F3721 (1975), all being identical in every way except for the model number prefix which designated the model year. The marketing name for this set was called the "Hals" and it was Zenith's lower end "economy" model TV. A step up would be a 14DC16 chassis which would have had AFC or in some cases, Space Command 100 remote control. I have this exact same set in my collection that I've had for years. I used to find so many of these back in the early to mid 90's and they are almost impossible to find now. You are fortunate to have found this for it's a great example of a quality tube type zenith TV in a small package.

It looks like it has much potential here. Looks like you need to adjust the color killer control so the colored snow *just* disappears. The color killer is on the back of the chassis. It's also a hot chassis. A cost cutting move which also resulted in the added benefit of weight reduction by removing the power transformer. As a result, the chassis can either be hot or neutral depending on which way you plug the set into the mains voltage. If you work on the set with the back removed and plugged in, be sure that the chassis is on the neutral leg of the 120v mains, otherwise you could be in for a surprise if you touch something and you are grounded.

You can buy an HLLY 50 mw TV transmitter on ebay, just input a composite video source from the output of a DVD to DTV converter and transmit on essentially any TV channel between 2-83. A great accessory so you can enjoy the old TV's without the mess of wires and cables hooked up to the set.
__________________
I tolerate the present by living in the past...
To see drh4683's photo page, click here
To see drh4683's youtube page, click here

Last edited by drh4683; 12-18-2013 at 10:52 PM.
Reply With Quote
  #9  
Old 11-21-2013, 08:19 AM
sampson159's Avatar
sampson159 sampson159 is offline
sampson159
 
Join Date: Sep 2007
Location: columbus,ohio
Posts: 2,170
its a zenith so its plug and play!those were some fine sets and the picture was always the best in class.great find
Reply With Quote
  #10  
Old 11-21-2013, 08:39 AM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
being a zenith portable from the 1960's makes it rare, I have not seen one locally in years. You should have no problem finding a home for it from someone here.
Reply With Quote
Audiokarma
  #11  
Old 11-21-2013, 11:10 AM
andy andy is offline
VideoKarma Member
 
Join Date: Jul 2002
Posts: 4,004
...

Last edited by andy; 12-05-2021 at 08:50 PM.
Reply With Quote
  #12  
Old 11-21-2013, 09:05 PM
Dave A's Avatar
Dave A Dave A is offline
VideoKarma Member
 
Join Date: Aug 2003
Location: SE Pennsylvania
Posts: 1,571
Not being an EE but a broadcaster for 44 years it might be educational to see what came before current EE thinking in this small plastic box full of lead solder, glass enclosed amplifiers just above the diode level, RF signals that magically become analog voltage signals, the division of those signals to sound and picture, a brute force voltage via capicitance to make an electron beam, the ratios of time and frequency to make a scanned picture in a particular ratio, color suddenly worms it's way in to the signal, and a view of it's little place in American design. A great well-rounded education on television...then, not now.

Please keep it and learn from it. It ain't that big. We all have worse problems with our wooden box console sets. You are already most of the way there with the screen name of Diode which is already friendly to us and we are in your corner. And we are looking for an EE to make our miserable flat-screens better. Back to the basics?
__________________
“Once you eliminate the impossible...whatever remains, no matter how improbable, must be the truth." Sherlock Holmes.

Last edited by Dave A; 11-21-2013 at 09:12 PM. Reason: text
Reply With Quote
  #13  
Old 11-25-2013, 01:27 AM
Diode's Avatar
Diode Diode is offline
VideoKarma Member
 
Join Date: Nov 2013
Location: New York
Posts: 10
An update on the set: I cranked it up on a variac over the course of a couple hours and it seems to be working great.

Sadly, unable to pick up any analog stations, and lacking anything that outputs analog video at RF, all I was able to display was snow. (it doesn't have an F-connector, so I am not exactly sure how I would input it anyway, except to maybe strap an antenna to the video source somehow). I am considering making some kind of frequency modulated transmitter and using an RCA output as the modulation signal so as to get a video signal to the antenna, but perhaps there is some easier solution I am missing here?

Reply With Quote
  #14  
Old 11-25-2013, 08:37 AM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
wally world and radio shack both sell cheap RF modulators that can take a composite video signal and output to channel 3 or 4. Then you need an composite video source, most DVD player still have that (video, audio L and R).

Or if you can find an older DVD player they had the RF out again to 3 and 4, thrift stores often have them for 5-10$

Or you can use one of the digital boxes sold during the change to digital (think it was 2009). Ebay/cragslist and may even still find them at places like radio shack, but not cheap (50$+ IIRC). These were often poorly made so I would not spend a lot of money on one. with these you need some kind of antenna, a cheap rabbit ears will work if you are near a large city.

you need a balun to convert from 300ohm to 75ohm (I am presuming the set has a 300ohm antenna connection) and some coax to hook up from what ever the device used to the set.
Reply With Quote
  #15  
Old 11-28-2013, 04:23 PM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
Baluns of the type needed to connect the set to coax can be had at radio shack for ~5$.
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
Audiokarma
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:20 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.