![]() |
|
|
|
#1
|
||||
|
||||
|
Hi.. I'm new to this forum. Sure glad to find it too.
I've got a 46-420 Hippo that I grew up with. I remember in the early 60s playing on the floor with this radio playing in the back ground. When I was around 6 or 7 I got into it.. For some reason, as kids do, I removed the loop antenna. Lost the back too.. durn! Now years later I unpacked it and thought I might restore it. A question for you folks: I've looked for some of that old wire, cloth wrapped and I think 26 ga for the loop antenna. You know of a source for this? And just how to get it to form into a “tape form” to look like the original?Or is there a better way to do this.. find a junker broken case.. build a loop around a small frame or get a repro back and wind one around that. .??I appreciate your advice. I've been viewing BandersentTV's vids on rebuilding and restoring radios. I really enjoy them. Takes me back to my early years at the old VoTech and later repairing Tv's at a local shop. I loved it! Thanks |
|
#2
|
||||
|
||||
|
Why is it called "Hippo"?
__________________
No wonder this circuit failed,it says "made in Japan"! |
|
#3
|
||||
|
||||
|
I think it's called a Hippo.. because of all the bullges and ripples the case has.. Ckt wise, it's a 6 tube Superhet radio. I know it doesn't look like a Giraffe.
![]() I think it's very classy or retro. I love Bakelite cases. Just do a search for a Philco 46-420 and you'll see. or.. maybe the guy that designed it liked Hippos.?? Who knows?Buzz |
|
#4
|
||||
|
||||
|
I thought maybe it was because the two knobs and speaker grill kinda look like a hippo smiling ?
![]() Perhaps you could drive some dowels into a scrap of plywood to make a rectangular form. Just the right size to slip inside the back of the cabinet. Then wrap your wire around it being careful not to overlap and glue it together to form a ribbon. When the glue sets up slide it off and mount in the radio. I used some two-part epoxy to affix mine to the cabinet. Last edited by bandersen; 03-21-2011 at 01:22 PM. |
|
#5
|
||||
|
||||
|
Hi Bandersen,
Sure.. that should work. Didn't the old door bell wire come in a cloth covered style.. Might be too large of a gauge of wire to work here. The bigger the wire the more I'll need to make a 2.6 ohm loop. I'll have to spend more time searching Ebay and other sites. Yes, I think you've got it. It does look like a Hippo smile. Must be it! I looked at that site that has the repo-backs for sale, and they mention in the FAQ section that no clips for the back have been designed or made to sell for the Hippo. So my search goes on. ![]() As I remember.. about the time I ripped into the radio, it was humming. The folks just kept playing it that way until you couldn't understand what was going on... kinda funny, I can still here the newscaster in the background under the Hummmmmm! Amazing what one can remember from the "early" years. Fond memories. ![]() Buzz |
| Audiokarma |
|
#6
|
||||
|
||||
|
Thanks for the photos,now I understand why it's called a Hippo radio.
Who would have thought the lowly Hippopotamus would be an industrial designers inspiration. So where is the Walrus radio? How about an Octopus tv?
__________________
No wonder this circuit failed,it says "made in Japan"! |
|
#7
|
||||
|
||||
|
#8
|
||||
|
||||
![]() ![]() antenn-ticals eight antennas for better reception!
__________________
No wonder this circuit failed,it says "made in Japan"! |
|
#9
|
||||
|
||||
|
I think you guys have been getting too much radiation from those old CRTs...
![]() ![]() The 7C6 , 7C7, 7B7, 7A8 are Loctal the rest are regular tubes. Buzz |
|
#10
|
||||
|
||||
|
Quote:
![]() And how are you going to attach them? Little suction cups? |
| Audiokarma |
|
#11
|
||||
|
||||
|
You can easily make your own loop antenna. See my page
http://www.wa2ise.com/radios/12ba7.html#loop
__________________
|
|
#12
|
||||
|
||||
|
Yes it would probably work, but with a saber saw and some 1/8" masonite (from home center or lumber yard) you can cut any form or back that you need, real cheap (that's me!)
__________________
Reece Perfection is hard to reach with a screwdriver. |
|
#13
|
||||
|
||||
|
Here's some pics of an Antenna I made and the back before painting:
![]() The Antenna Loop is just attached with clips for now until I see how it works (after recapping). 28 ga wire about 45 feet for 3 Ohms. (22.8 raps at roughly 2 feet per wrap). I left it long so I could take some off if needed.
__________________
______________________ Buzzsaaw Sunlitedreams.com
|
|
#14
|
||||
|
||||
|
Wow, that's a beautiful job! Very nice.
Say, it just occurred to me, the title of this thread, "My old Hippo loop antenna," was a phrase never ever uttered before in history!
__________________
Reece Perfection is hard to reach with a screwdriver. |
|
#15
|
||||
|
||||
|
Yes.. that is a goofy phrase. But it's better than a "looped Hippo!"
__________________
______________________ Buzzsaaw Sunlitedreams.com
|
| Audiokarma |
![]() |
|
|