RCA Entertainment Series Console TV

[Console User]

I just recently acquired an RCA Entertainment Series Console TV. It is the Model G27647. It is dated May 1999. I am wondering when I go into the TV Menu to choose options for hookup, I do not see the option of Video1 or Video 2 or Composite Cable Connection. I just have the Channel option of the S Video.

I am looking for advice on how to hookup the set to the RCA Composite Cables.

[Console User]

I have the Model G27647 RCA Console TV Entertainment Series with the CTC203AX Chassis. I go into the Service Menu to Adjust the Color Drives and it's not storing my settings. Instead, it is changing the settings to random numbers neither factory set or numbers changed by me. I hit the Menu button then power button before turning the set off. However, it is not storing the settings I want it to be set on.

Anyone have any advice on what's going on here?

Thanks.

[Alex KL-1]

Originally Posted by Console User

I have the Model G27647 RCA Console TV Entertainment Series with the CTC203AX Chassis. I go into the Service Menu to Adjust the Color Drives and it's not storing my settings. Instead, it is changing the settings to random numbers neither factory set or numbers changed by me. I hit the Menu button then power button before turning the set off. However, it is not storing the settings I want it to be set on.

Anyone have any advice on what's going on here?

Thanks.

EEPROM failed?

[Console User]

Does anyone know if you hookup the G link cable on the back of the set and place the wand or wands in front of your Satellite Receiver and VCR if it will still work to control those two devices with the correct TV Remote for this particular series of TVs?

Thanks.

[Console User]

Originally Posted by Alex KL-1

EEPROM failed?

Would an eeprom for the RCA CTC203AX1 work in the RCA CTC203AX Chassis? My chassis is the latter one. I am thinking the set values in the parameters for the Red, Green, and Blue Drive are going back to the set value that was on the Set. The values of the parameters I enter stay usually until the Set it powered off and back on.

Thanks.