Quote:
|
Originally Posted by rca2000
But one or 2 people could probably "teeter totter" one end of it into a minivan or truck, couldn't they, and then shove it the rest of the way in?
|
While it's a big job, you can pull the chassis out complete with CRT. It's on roller bearings, and rolls into the cabinet from the back. 6 12mm nuts hold the front of the chassis to the cabinet, and a few more large bolts hold the bottom rear. You have to cut and resolder the wires that go to the motorized door safety sensors.
One more moving tip: The veneer on the base is very easy to rip off. So much so, that there's a spare piece of Tamo veneer in a bag on the back of the set.
Charles