View Single Post
  #8  
Old 12-13-2006, 04:53 PM
John Folsom's Avatar
John Folsom John Folsom is offline
VideoKarma Member
 
Join Date: May 2004
Location: Melbourne Florida
Posts: 932
Rich,

It kinda looks like a CTC-4 yoke....? The number on my CTc-4 yoke assembly is 1106249-1. Of course, the part number on the RCA box never shows up on the actual part (curse you, RCA).

My 21CT55 yoke has a similar copper back cover plate, but like the yokes shown above (from the Harry Poster ebay auction), it has 3 aluminum standoffs, which support a flat doughnut for ferrous material about 1/4" think and 1" wide.

My CTC-4 yoke, like the one Rich shows, has a copper back cover with a thin flexible metal doughnut supported by 3 standoffs.

The CTC-5 yoke does not have the extra piece mounted on 3 standoffs on the back cover.

So to make a long story short, I think that is a CTC-4 yoke.
__________________
John Folsom
Reply With Quote