View Single Post
  #28  
Old 11-18-2006, 11:22 PM
blue_lateral's Avatar
blue_lateral blue_lateral is offline
...
 
Join Date: Mar 2005
Location: Washington State
Posts: 530
Also you might check the 6bk4 current. There is a 1k resistor in the cathode circuit. Make sure it's still close to 1k, then hook a meter across it and read the current as voltage. Sometimes if a 6bk4 arcs or otherwise fails, it will toast some of the resistors in the grid circuit. Also the grid capacitor can short. I see from the schematic that the grid capacitor has a spark gap across it, probably to prevent damage, but I would be a bit suspicious of it nonetheless. If the bias on that tube was all screwed up, it might be drawing all the current the system can produce.

John
Reply With Quote