Quote:
|
Originally Posted by Chad Hauris
I wonder if it would be possible to create a solid state round set by using a chassis from a solid state delta gun set? I have some salvaged working late 1970's RCA chassis from sets that had bad CRT's,.plus several round sets with bad flybacks,etc. I guess one of the problems might be the yoke inductance would not match up and perhaps the HV from the solid state chassis would be too high.
|
Shouldn't be a problem! Just think about a test jig... They have various ballast resistors & coils to correct the yoke inductance for any chassis. The gun voltages are all the same among most delta gun sets. High voltage; 25KV should be no problem on a 21" round tube. I'd try it with a Chromacolor II chassis
Charles