View Single Post
  #23  
Old 11-13-2006, 11:45 PM
N9ZQA's Avatar
N9ZQA N9ZQA is offline
VK Member
 
Join Date: Feb 2005
Location: Joliet, Illinois
Posts: 161
John -

Just finished messing with the set for this evening. Here's what I've found out:

1. The oscillator is on frequency (at least as close as I can get with my scope).

2. Screen voltage starts out at about 450 at power-on, and drops to a low of about 75 and then begins to rise again. Haven't made it past this point since the HO tube starts to glow. The two schematics I have for this set show 90VDC and 180 VDC for the screen voltage.

3. Removing the picture tube socket had no effect on the high voltage (or lack thereof). Same with removing the focus rectifier.

4. The cathode of the damper tube is also glowing. I hadn't noticed until you mentioned to look for it. I'm going to pull it out in a second and check for shorts between the elements.

Jim
Reply With Quote