View Single Post
  #8  
Old 11-09-2003, 08:52 AM
Chad Hauris's Avatar
Chad Hauris Chad Hauris is offline
VideoKarma Member
 
Join Date: May 2003
Location: West Texas
Posts: 2,085
These sets are all based on RCA-CTC 16. They all have very similar tube lineups, though in some of the late models the quadruple diode color killer/phase detector (6Ju8?) has been replaced by solid state diodes. A lot of the private brands/smaller brands used the RCA CTC 16 design...Hoffman, Wards, Sears, Philco, Curtis Mathes, Early GE's, must be more too.
Most of these sets are not actually built by RCA, you can see the labeling on the circuit board, the HV cage, 6BK4 shield, etc. are different, but the design is RCA CTC 16. Some have additional features souping up the RCA design, such as a color indicator lamp, instant-on, a front panel color temperature control, pincushion circuitry for rectangular tubes, 6BQ5 audio output and such.
Reply With Quote