[wiseguy]

tim.. i am sure it could be wired to work somehow..but i wonder if the yoke on this jig is wound and tuned for solid state sets or tube..
I bet you could get a simular tube,... maybe smaller and wire the
guns to match the 15G's.even the focus voltages should work. then slip the ct-100's yoke over the neck and use wedges to align it..then you could somehow get it mounted inside the set..i would use a real old 15" CRT with a larger neck..
just my thought!!
also..I am not sure how much the raster would look .. maybe kinda zoomed in because of the deflection angle of the yoke in a 15G which i think is 90 degs..so if you find an old 15" rec set that is close to 90 degs it should be ok,and you would only be able to do convergence using magnets..
terry