View Single Post
  #12  
Old 10-03-2006, 07:28 PM
Chad Hauris's Avatar
Chad Hauris Chad Hauris is offline
VideoKarma Member
 
Join Date: May 2003
Location: West Texas
Posts: 2,085
There were some Compactrons used in audio equipment...I think the 6K11? triple triode was used in Ampeg guitar amps and some Scott tuners.

7868 Novar tubes were used in Rowe Jukeboxes and several types of amps such as Bogens and Fishers...also some types of tuners used nuvistors.

Around 1964 or so I think innovation in tube design basically stopped on tube audio for the most part (except for real high-end specialty items.)
Tubes continued to be used in the later 60's and 70's in industrial/commercial items that demanded ruggedness and durability such as radio transmitters, organs, PA amps and jukeboxes, and in guitar amps for their tone qualities. Most of these items used old standard tubes such as 5U4's, 6L6's, 6550's 12AX7's etc.
There were a few new audio types developed such as the high power 8417.

After around '64-'65 mass market tube audio devices such as receivers and radios were usually older designs kept around because they were cheaper to make.
On TV's though all solid state sets were still too expensive for most people to buy until the mid 70's or so, so new tube types kept being developed for those applications, especially new types for series string sets.
I think the first compactrons were introduced in 1963 or so, right before transistor audio really took off.
__________________
Chad Hauris
http://www.youtube.com/user/retrochad

Last edited by Chad Hauris; 10-03-2006 at 07:34 PM.
Reply With Quote