View Single Post
  #17  
Old 09-26-2006, 07:07 PM
andy andy is offline
VideoKarma Member
 
Join Date: Jul 2002
Posts: 4,004
If you can find another yoke, you could try to replace it. The hard part will be finding a compatible yoke to replace it with. The yoke has to match both the electronics and the CRT.

I have removed bonded yokes before so I could reuse the CRT in a different set. It's not that hard to do if you're careful. You have to disassemble the yoke from around the CRT neck one layer at a time.
Reply With Quote