|
First thing I always check on TVs with bad behaviour is for "cold solder" joints. Rescued several TVs this way - almost always a bad joint where the flyback is soldered to the board. I guess the flyback is so chunky that if it is unsupported, eventually these solder joints fail.
In fact, the JVC set I have been using for almost 10 years was rescued from the garbage pile at a friends apartment building and had this problem. At the time the TV was only about 2 years old.
__________________
SED Model 2 (homebrew 12AX7 preamp)
Cambridge Audio azur 540p
Rega Planar 2 w/ Sumiko Blue Point Cart
Audio Alchemy DDS Pro Transport
Entech 203.2 DAC
SED Model 1 (homebrew 6V6 PP amp)
Polk Audio Monitor 7
|