View Single Post
  #20  
Old 07-19-2006, 01:31 PM
Adam's Avatar
Adam Adam is offline
VideoKarma Member
 
Join Date: Oct 2005
Location: Phoenix, AZ
Posts: 2,383
Quote:
Originally Posted by kbmuri
Adam -
My first thought on the exploded red goop is that it was a very liberal application, by a previous owner or serviceman, of Corona Dope. I didn't really see it in your open-chassis pictures -- did you remove it?

The photos also show a great deal of the outer conductive coating missing from the picture tube. Did you re-coat it? If so, what product did you use (I have a 10BP4 that needs it)? not, what's the penalty for leaving it off?
I left the flyback as it is in the earlier picture. I was so relieved to find it was good, that I didn't want to mess with it anymore than I had to.

On the 10BP4 all I did was remove the loose bits of coating. It doesn't seem to have any problems the way it is. Is anybody aware of any products out there for recoating it?

Quote:
Originally Posted by Eric H
Adam, do you need the knobs for that set?

I may have some laying around and failing that I have a set I'm probably going to junk that has some.
Quote:
Originally Posted by Kaye-Halbert TV
And I (gulity, gulity!!!) still have them too...

Charles
Charles already went through the trouble of digging those knobs and a few others out for me awhile ago, but if you do decide to junk that other set, I do need the top of the HV cage, and the back. Thanks.



And thanks for all the compliments on the refinish, this is the first one I did, and I was worried when I started that it was going to turn out bad, but it is actually easier to do than I thought it would be.

Last edited by Adam; 07-19-2006 at 02:35 PM.
Reply With Quote
Audiokarma