Quote:
|
Originally Posted by Geoff Bourquin
I haven't worked on one of those in years, but one thing I do remember is that if you are not VERY careful when you take tubes out, you'll take out the socket and a chunk of the pc board too. Especially around the horizontal and vertical outputs tubes. I dont remember any other sets being quite so bad about that.
OK, 2 things I remember....Lots of bad flybacks too.
|
I was able to look inside the back and I believe I saw the horizontal output and damper tubes mounted on the metal chassis The high voltage cage is on the left hand side if you are facing the front of the set. It was hard to make out any other details as there is almost forty years of dust inside the set.