View Single Post
  #22  
Old 06-25-2006, 07:14 PM
Chad Hauris's Avatar
Chad Hauris Chad Hauris is offline
VideoKarma Member
 
Join Date: May 2003
Location: West Texas
Posts: 2,085
Flyback failure occurs with an overload on the horizontal output circuit causing the flyback (horizontal output transformer) to burn out. I had a CTC-31 flyback meltdown, it started smoking and burned everything in the HV cage. I have been installing fuses in the horizontal output cathode circuit, 300 ma (1/3 amp) seems to do.
You will want to make sure the horizontal output current is not too high...for this I have removed the cathode fuse I installed and replaced it with a 6.3 volt lamp, then adjusted efficiency coil for minimum lamp brightness.

The weird thing is that the series filament portable RCA tube color sets had horiz output protection built in but the consoles do not. One type used a dual circuit breaker with two terminals for the power line and two for the horiz output cathode. Either a power supply overload or horizontal output overload tripped the breaker.
Another type used a thermal fuse in the HO cathode circuit. This sensed temperature near the HO tube and if the tube got too hot it would open the cathode circuit.
__________________
Chad Hauris
http://www.youtube.com/user/retrochad
Reply With Quote