|
Update on the RCA:
* Re-soldered five of the connections between the chassis and PC circuits. They were broken connections before, from what I could see.
* Found that one of the two tubes I did not replace with new ones has gone out. That may explain why the CRT went black.
* This tube also should have been a 6CL3 from the diagram, but is a
"6CJ3/6DW4B/6CH3". Any advice on this? It was lighting up when I first got the set and when the set was working. I can't get it to light up...cleaned the tube plug and checked for breaks in the solder....Wiggled the tube a bit too. The tube has a shaking sound inside.
The blanker tube seems OK to me, but I have no tester. It's a new tube (NIB).
The Chassis is CTC38A.
Thanks!!
Last edited by Radiophile2001; 06-25-2006 at 03:36 PM.
|