|
sound: check the Buzz control on the rear of the chassis. i believe this was part of the discriminator so it may clear up the sound. The 6j10 has the same base as the 6z10, but electrically the 6j10 is the better of the two. Try subbing it out.
I'm surprised the vertical controls are no on the rear of the chassis where the screen and driver controls are. Are you sure there are no holes inside the control door where the rest of the controls are? sometimes there would be screw driver adjustments next to the pull-out controls. It would also be where the static convergence is hidden. See if there is a 1/4" head inside the control door. Some zeniths had these to remove the speaker, which the convergence controls and the like were hidden behind.
__________________
Jordan
|