View Single Post
  #10  
Old 06-12-2006, 02:57 PM
Radiophile2001's Avatar
Radiophile2001 Radiophile2001 is offline
VideoKarma Member
 
Join Date: Jun 2006
Location: Montclair, VA
Posts: 105
I can tell you this, that set has shocked me twice now while working on it.....beats coffee any day of the week! ;-)
(Yes, for the most part, I unplug it first.)
"Pulling the chassis" sounds pretty complicated. Is it just unscrewing the chassis from the wood of the set and disconnecting a few wires? That would be do-able.
Again, my first objective would be to check for solder breaks between the PC board and chassis. This can only be accomplished by pulling the chassis, no shortcuts? I have cut away some of the soft, vented particle board from the bottom of the set already to get in there and solder the 12HG7 tube plug. I turn the set over on its face using couch pillows to cushion it. A nice 500-watt halogen light makes seeing things quite easy.

Thanks

Last edited by Radiophile2001; 06-12-2006 at 03:02 PM.
Reply With Quote
Audiokarma