View Single Post
  #5  
Old 04-28-2006, 12:49 PM
andy andy is offline
VideoKarma Member
 
Join Date: Jul 2002
Posts: 4,004
If you're on cable, some channels might have slightly over-modulated video. That's not a problem for a modern set, but an old IF circuit that's not perfectly aligned will cause some leakage into the sound.

As for your set eating modules, bad soldering is the most common problem with those. Zenith never really got the hang of circuit board soldering, even by the late 80's they were still having trouble. It's also not unusual to see old TVs with numerous intermittent problems that the original owner put up with. Once you fix the main problem with the set, those other problems gradually become apparent.

Last edited by andy; 04-28-2006 at 12:52 PM.
Reply With Quote
Audiokarma