View Single Post
  #12  
Old 04-21-2006, 12:59 AM
Geoff Bourquin Geoff Bourquin is offline
VideoKarma Member
 
Join Date: Nov 2005
Location: Northwest Washington State
Posts: 365
I have to agree with the majority.....

I would pass on it. In 20+ years of fixing these things, I have seen a ton of them that people got stuck with. "But it was such a good deal; the guy just gave it to me!" If he's practically giving it away, there is probably a reason. On a few occasions I have gone out to look at a set, only to find it is the same one I looked at somewhere else last month, and told the guy to trash it.

If it is getting dim, the tubes are probably getting weak. If it is just dirt on the mirror and lenses, it would probably be cloudy too.

I have also seen the "Capacitor guts all over the board" problem too. It could keep you busy for a long time changing caps and cleaning electrolyte off of the board.

Might also be bad surface mount electrolytic caps in the PIP module. I've rebuilt a bunch of those, and working on them will make you go cross-eyed. (if that is the problem, you'll probably have sync and color problems too)

Long story short: If it doesn't look near perfect, don't take a chance. You'll end up paying another $50 to dump it

Reply With Quote