Quote:
|
Originally Posted by JCFitz
Oodles of them.Lots of used modules.Most were good pulls but don't know if some are bad since I have no System 3s to check them on.I believe all the good 9-155-01 crt boards are gone as well as what few 9-160 power supplys I have left are parts only.I threw about 2 dozen cannibalized boards away.Kept the Horizontal output xsistor and dual filter cans if still present.There may be some CRT boards that still have the ceramic resistor elements intact though.Plenty of 9-151s,9-152s,9-154s from the early version,tuner control modules.Lots of small trim parts and control assys new in the box.A bunch of Chromacolor II modules here too.
|
Yeah, I'm looking for these parts:
Zenith
SY2585P2
175-2030 tuner
9-190 module
9-186-01 module high voltage
9-181-02 module
9-181 universal replacement
204-860-0211 tube
Especially the 9-181-02, IIRC, from what I learned here, my red screen problem is usually on that board in a resistor assembly. What part of Maryland is he in? Would he consider shipping if I cover the cost of doing so?
Chuck
P.S. - I would have checked back a little sooner but one of my cats passed away on Saturday but before that I was trying to keep him alive. Greystone had kidney failure and he was only turned 5 years old. He is my avatar.