[Adam]

It works! I thought that flyback would be bad for sure by the looks of it, but its not at bad all. I started with the .05, put it all together and got a blank raster only. After cleaning the tuner, it pulled in a few channels. The horiz. linearity was way off, I was about to change to the .02, but I tried adjusting that big resistor first, and that did it. So I left the .05 in there. Adjusting width coil has no effect on the picture at all, I don't know if that has to do with the .05, or that it lost a few turns, but the width is about right where it is anyway.
The tuner even after cleaning it a bit, still only pulls in ch 2, 4, and 5. It will get ch 7 if I hold it inbetween channel 7 and ch 8, it will also get ch 9 if I hold it between 9 and 10. It won't get ch 11, 13 or 3. There is no ch 6, 8, 10, or 12 here. I really only watch tapes, dvds, and uhf anyway, so even if I can't fix this, as long as I keep getting ch 4 it doesn't really bother me too much.
I think I'll try cleaning the tuner once more, then move on to another broken set.