View Single Post
  #13  
Old 02-23-2006, 11:55 PM
Chad Hauris's Avatar
Chad Hauris Chad Hauris is offline
VideoKarma Member
 
Join Date: May 2003
Location: West Texas
Posts: 2,085
Do you mean the cathode lead actually melted in the damper tube?
You really need to find the source of the trouble by taking measurements, you can't just try this or that without some ideas as to what's going on in the circuit electrically, you will have a difficult if not impossible time fixing the problem by just replacing stuff without finding the fault.
Components that burn up such as resistors or flybacks usually don't doit by themselves, there is an overload or short somewhere in the circuit that causes too much current to be drawn.
__________________
Chad Hauris
http://www.youtube.com/user/retrochad
Reply With Quote