|
Whaht Kaye-H described definitely sounds like coding artifacts (blocking on scene changes and motion), not weak signal. In weak signal problems, the blocks will have violently wrong color, whereas, when the coder is bit-starved, the blocks are due to the high frequencies being attenuated and mainly the average color over the block being sent. Two fixes: more bandwidth allocated to the program (ha ha), or sit further back from the screen. High quality analog cable can be better than bit starved digital, but I got fed up with the low-quality analog (streaky noise, levels unbalanced resulting in cross-modulation) on my cable system years ago, and switched to satellite (Dish Network). I have watched the Dish artifacts change over the years as they get new coders, and while the nature of the artifacts has changed, the general level has not. Dish used to have a lot of "mosquito noise", e.g., on close examination, the details looked "twitchy"; now its just looks smeary, and there's some weird motion artifacts on the local channels where the movement of the low-contrast shading and color within an area seems to lag the movement of the area boundaries. I'm guessing that the newer coders made the pictures better, so they cut back the bit rate to the "tolerable" point again.
On the other hand, the HD pix in over-the-air programs can be stunning and artifact free. Some stations are experimenting with cutting the HD bit rate to carry simulcasts of news and weather, with varying success. The local ABC station (note: the HD is in 1280x720P) seems to get away with adding two SD channels very well. The NBC station (HD is 1920x1080I) seems to also. The PBS station, though, shows some coding artifacts on scene changes. I think it depends on how new and well-tweaked your coder is.
|