Im gonna dregde this one back up from the dead. Sorry guys its been a loooong fall. Also for some reason i had to make a new account. as my other one i couldnt log into. But its me, same old me. The radio has been sitting in my bedroom, looking pretty but not working, since my last post. Well tonite after work i had nothing to do *gasp* and as i sat down to watch TV i looked at the 'ol Zenith. I went to radio shack armed with the schematic and bought resistors to replace all of the old ones (if need be). the thought was to leave the originals if they tested in spec, but i didnt want to have to run out again and buy more if i didnt have them. Cause that would be an excuse to not git it workin tonite.
Sat down with my Fluke meter i use at the shop, wire cutters, soldering gun, and schematic, and went to town. I tested the ones that looked cooked first, starting the the audio output section. Im not that great at electronics but can read a schematic and can use a meter. I went through cutting a lead or removing a tube wichever would isolate the resistor. I found that R14 in the ryders schematic was open, where it sould be 2200ohms. Also R18 drifted from 150ohms to over 300. R3 was supposed to be 4.7Meg, tested over 6meg. And R16 was 220K ohm, up from 150K. All other resistors tested within spec (taking tolderances into account). So now the moment of truth. Plugged it in and was delighted to hear a hum when touching pliers to the volume pot. tinkering with the band selector i was able to pull in AM, lets just say, LOUD and clear (forgot the volume was up fairly high). FM didnt at first seem to work, but i realized the antenna lead had come undone from the back of the radio. fixing that brought in AS MANY if not MORE FM stations than my Sony reciever. And must i say, expremely clearly. Tuning past a rap station (shudder) the cone on that old zenith speaker got a workout. The selectivity is impressive. I dont have anything to judge it against besides modern radios and my Sony reciever that has digital tuning, but id say im most impressed.
It defintaly needs a good once over with de-oxit as the selector knob is scratchy, as is the volume controll. I let it play for about 30 minutes, the filter caps are ever so slightly warm, but there is zero hum, so i dunno if i sould leave them or change them out. Also the origonal selenium rectifier is still hooked up, i forgot to buy the new diode, and that gets QUITE warm, so im nervous about running it too long with that in place.
Im hooked guys. I fix cars, i love cars, but this is different. The cars i work on are modern and have no soul for the most part. This is the first tube device ive fixed (besides just re-capping) and seeing it play a classic rock Fm station with the lights off and just the glow of the tubes is quite romantic. Yes me and my radio had a romantic moment
All thats left is a new rectifier diode, dial cord, and haul it to the shop to replace the ailing boombox i have in my office. The sound out of this is 100 times better. Or maybe it just sound that way o me casue i made it sing for the first time in possably decades
Thanks for all the help, sorry for the long post, i just wanted to share. And im sure you wanted to hear my sucess story.
Keith