|
You usually don't need an alignment on a set this "new". I have only had to align very old sets like from the 30's and 40's, and you will need to align if IF can caps are replaced.
In your case though there is likely a circuit defect...usually when there is the IF can problem you will get NO stations at all or you will get only AM but with a lot of crackling noise. Since you are picking up stations it leads me toward thinking of a bad tube problem...Often times the 12AT7 or 12DT8 FM RF tube will go bad, also make sure your IF tubes are OK.
If you still have buzz double check your tubes, you may have heater to cathode leakage in a bad weak tube...
|