View Single Post
  #16  
Old 09-17-2005, 05:53 PM
Chad Hauris's Avatar
Chad Hauris Chad Hauris is offline
VideoKarma Member
 
Join Date: May 2003
Location: West Texas
Posts: 2,085
The filament voltage in this set for the crt should come from the power transformer, not the flyback...there may be another transformer to provide a smaller "instant on" filament voltage too.

Damage from a cracked CRT can be very subtle sometimes...It may not appear right after the damage is done but it can take a while for the CRT to air out. I have seen this in a dumpster-salvaged Zenith. The focus pin had been cracked off and I was able to solder a wire to the nub to get it going but there was a micro-crack that caused the CRT to go bad after several months.
__________________
Chad Hauris
http://www.youtube.com/user/retrochad
Reply With Quote