|
You can do a real good alignment with just an RF generator and your ears, once you get all your caps and wiring repaired. If you can pick up radio stations you may not even need the RF generator.
The Sams or Riders often will have the order to adjust the coils or trimmer caps but is not an absolute necessity.
If you can receive all of the radio stations across the dial you just need to tune one in and adjust the broadcast band RF and Mixer trimmer capacitors in the RF and mixer stages. Don't adjust the oscillator trimmer. Then adjust each of the 4 IF trimmer capacitors till the sound is strongest. Also, your tuning eye tube is a very good indicator of signal strength and you can use it to peak the adjustments. Then tune in a weak station and adjust for the strongest reception.
When I worked on this model I was not able to receive any stations below about 700 khz, had to use the RF generator to generate a signal at 550 KC and adjust the oscillator adjustments till the signal could be picked up. Also the RF generator is good for checking and aligning the shortwave reception. There will be different RF, mixer and osc. trimmers for shortwave.
Last edited by Chad Hauris; 09-12-2005 at 08:47 AM.
|