Thread: Sets with VIR
View Single Post
  #2  
Old 03-05-2003, 10:00 AM
wvsaz
Guest
 
Posts: n/a
Question

VIR stood for Vertical Interval Reference signal. It was developed by GE, and was intended to eliminate color differences between stations without having to readjust the controls.

The VIR signal was inserted by the local TV station. It served as a "stamp of approval" on the color leaving the station, and the set equipped with VIR would indeed display the exact same color the station was transmitting.

The problem was that many stations were sloppy in adjusting their equipment, and flesh tone & color intensity varied from one video source to another. The VIR signal "locked in" these color differences on the receiver and did not allow the viewer to adjust them. One of the first changes in the VIR circuit was the addition of a "defeat" switch on the receiver!

The use of VIR by TV stations never fully caught on. It was permitted, but not required by the FCC. Some stations used it, but many never did. It died a slow and natural death.

Today's broadcast equipment and consumer receivers are far more stable than they were in the 70's. In spite of this, sloppy operation remains, and you can still see color variations on some stations. Color on satellite channels is amazingly consistent, which shows it can be done if someone cares.

Last edited by wvsaz; 03-05-2003 at 10:04 AM.
Reply With Quote