View Single Post
  #10  
Old 08-05-2005, 11:28 PM
Keefla Keefla is offline
VideoKarma Member
 
Join Date: Dec 2004
Posts: 192
UPDATE: i got it to make noise! AM and FM. its recieving a signal on both however its intermittent and very distorted on FM, and very weak on AM. Im getting a can of de-oxit and im gonna spray the selector switch with that. one thing i noticed thow is that there was NO output at all unless 2 resistors on the audio output tube were touching leads (they arent supposed to be according to the schematic.) I dont remember what they went to off the top of my head, ill post that tomorrow, but im thinking the resistors are high in value and cutting off the output. I have to say they look kinda textured looking, not like the other resistors. Ill give it another go tomorrow after work. Also after running it a bit the humming has gone down and the cans are a bit cooler, and so is the rectifier (still selenium) is a lot cooler too, im monitoring its temp very closely and im gonna pick up another diode tomorrow when i get the de-oxit. Any other suggestions are welcome.

Thanks guys!
Reply With Quote
Audiokarma