|
Hey bill,
You will need some 300 ohm antenna wire (you can get it at most electronic stores like rat shack). Inside the cabinet on the tuners (things that the tuning knobs are attached to) there are two posts on each tuner. Ther may be evidence that someone cut wire which would definitely stand out. If you are handy with a soldering iron, you can solder one end of the wires to the tuner posts, and then buy connectors that press into those holes on the back cover (i for get what they are called) They press into the board, and have a screw terminal on each one. Repeat for the uhf tuner.
I hope this is a novice enough explaination for you. I may be able to get some example screenshots if i can get around to it. I am sure you will find plenty of help here on AK. Welcome aboard!!
Jordan
__________________
Jordan
|