View Single Post
  #14  
Old 05-21-2005, 03:38 PM
Chad Hauris's Avatar
Chad Hauris Chad Hauris is offline
VideoKarma Member
 
Join Date: May 2003
Location: West Texas
Posts: 2,085
The idler wheel size makes no difference in the speed when there is a 3-component system in a phono (motor shaft, idler wheel, turntable)...what does, are the diameter of the motor shaft and the inside diameter of the turntable. The idler just has to physically fit between the two...it is just a "go-between" and has no influence on the speed of the turntable.

We do a lot of work on 40's era phonos and find that new old stock Walsco, etc. replacement idler wheels in sealed packages still have their pliability...most idler wheels that have been exposed to the air for longer than 30 yrs or so get hardened and end up transmitting motor vibration to the record resulting in excessive hum. Have not tried re-built idler wheels.

We have been able to rejuvinate wheels that have dents in them from sitting against the motor shaft by chucking them up in the drill and using sandpaper to grind away the very outer edge, containing the distorted area...rubber rejuvinator can help on dried out wheels but it seems to be a temporary fix.
__________________
Chad Hauris
http://www.youtube.com/user/retrochad

Last edited by Chad Hauris; 05-21-2005 at 03:42 PM.
Reply With Quote