View Single Post
  #5  
Old 05-18-2005, 04:23 AM
RetroHacker RetroHacker is offline
Electronics Accumulator
 
Join Date: Jan 2005
Location: Niskayuna, NY
Posts: 464
Well, there's a couple of possibilities. The flyback may indeed be bad, which would explain why some previous owner had removed it from it's mountings. Or you could have any number of other problems contribuiting to a lack of high voltage or lack of raster. Do you get static on the screen? By that I mean, can you put the back of your hand up to the face of the tube and feel the static? You may be getting high voltage, and not even know it. Try this - turn out all the lights in your workshop and then turn on the TV, and watch the screen carefully. If the CRT is really, really, really dim, you may be getting a picture, you just can't see it because the smallest amount of light washes it out. Another test for high voltage is to get a small neon lamp, and tape it to the end of a pencil or other non-conducting stick. While the set is operating, hold the lamp near the CRT anode connection. Typically, the lamp will glow in the presence of high voltage - it doesn't even need to have leads on it. It's the charge that excites the gas in the lamp. Of course, this is a small screened, immediate postwar set, I haven't worked on anything quite that old. It might not have enough HV to detect like this. That's also an electrostatic deflection tube, right? Haven't worked on anything with electrostatic, so I'm not sure what all will apply and what won't. Good luck, and hopefully, someone who knows more about the set in question can give you some more useful advice!

-Ian
Reply With Quote
Audiokarma