http://suzaku.live-evil.org/maggy-solved.jpg
So, everything that I have looked up on the topic says that raising the value of the 2 resistors that go to the 2nd grid will lower the width a bit, the set has the original 3.9k ones in it 1W, old but still tested OK, and hooked to 10k resistors, to the 2nd grid, the docs say to use the switch to adjust for line voltage and strength of the HOT, it does have some effect on width, thinking of trying 2 4.02 kOhms 2w resistors, that should not have that much impact on HV I would think. And I could always defeat them with the switch.