Quote:
Originally Posted by luRaichu
Ceramics are used for this purpose. I see power going across them.
I've gone through the possible solutions for "DEAD, NO RASTER, etc..." on the Anatek Resolve database, have tested each passive part listed there and they're all good.
|
Not working at all somewhat implies that you have a power issue. You should be able to figure out what's wrong by tracing all of the voltages from their source. If you're lucky, one of them will be straight-up missing and you'll know right away
Are you getting High Voltage? You can figure that out pretty easily by using a frequency analyzer app on your phone. If your HV is okay, you'll see a spike on the app at around 15kHz for sure