|
Good information. I will try to keep the leads of the 2 replacement caps as close to original lead length as possible. They are in the Horizontal Blanking circuit tied to the diode and also to the setup side of the setup switch. As you may remember, I can't get the setup mode to produce anything but a faint blue line at full and nothing from the other guns at full. I have to adjust with a greyscale ramp pattern and with the setup in normal mode, same max rotation of the G2s brings up a super bright raster, so I know the controls work.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|