|
Also, in the horizontal section, I replaced the damper diode (CR218 on previous post pic) on the HOT and lifted the leg of the boost diode (CR219) and it tested good, but I'm not sure if that excludes it from being an issue. The only things left in that area would be all the ceramic caps around them and the resistors. I remember someone, some time ago, saying that ringing is reduce/removed by using diodes and caps and if one part of the circuit is bad our out of spec, ringing can return.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|