|
When I first got the TV, recapping all the electrolytics improved image and resolved a number of issues. There is one board I did not touch, the video processing module. That one is under a metal shield/box. However, going over the modules in the SM I noticed that the board has 2 electrolytic caps on it. I think I'll replace them, just in case.
From what I can find, that module is first in the chain and can cause brightness and color issues.
Update.... Well I found, after posting this, that I had already purchased a new module back in 2013, but never installed it. It's not a remanufactured module and is the updated version. It has one capacitor, instead of two, and updated socket for the IC and less overall in terms of components. It's also the white board, not brown. I think I'll check the single capacitor on it and then install it.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
Last edited by TinCanAlley; 01-30-2026 at 11:41 AM.
|