|
While I was waiting for any help that my come by, I reflowed the solder on the power transformer and flyback transformer. When I went to test a resistor that connects to the Horizontal transistor, the pad completely lifted up. It was barely holding on. The area was also super dark from a lot of heat. Resistor tested fine, so I added fresh solder and ran a heavy duty jumper wire.
Picture came back up and has turned on every day this week in the morning and evening. So I hope maybe it was just a cracked solder joint somewhere (or that lifted pad from the resistor.) Who knows. The popping sound I used to hear is no longer there, so that's good.
Audio still doesn't work, but I can tackle that next.
I could still use a copy of the schematic if anyone has it so I can check voltages to the ICs.
Thanks.
|