1600V isn't super common but most color and some monochrome have one or 2 caps at 1k, 1600V, or 2kv. I used to stock a full spectrum of 630V and have a separate bin for 1-2KV caps, but lately on the the Panasonic red ceramic covered film caps I favor 1.6KV long leads have been cheaper than 630v if 630V is even still available....so much of my 630 stock has moved to being 1600v.
Stuff not from the 40s especially RCA some power of 10 x 27 is common. I typically stock .1, .12, .15, .22, .27, .33, .39, .47, .56, .68, .82 and 10x and 100x lower capacitance in film.
...gives me just about all capacitance values in the modern value system used in sets 1975 and older and better matches for the prewar system...some values rarely get used but that just means I only need 10 to restock every 3rd to 5th restock order.
Quote:
Originally Posted by bandersen
Lots of oddball values in this set like 0.0027 @ 1,600 volts. So I'll have to place an order before I can do much more.
Cleaning certainly helps. Just warm water and Simple Green. Some residual wax remains from the old caps but I'm just going to leave it.
Chassis is another matter. I'm using CLR to remove the rust and cadmium sulfide/oxide.

|