View Single Post
  #27  
Old 04-20-2025, 02:11 PM
MRX37 MRX37 is offline
VideoKarma Member
 
Join Date: Aug 2005
Posts: 1,579
Easter resurrection!

It's an Easter resurrection!

Here it is, Easter Sunday 2025, and I have a resurrection of my own to celebrate! After replacing slugs in L304, and L201, I was able to get the I.F working *Good enough!*

Is it perfect? No. I don't have a scope. I don't have test equipment. What I do have is perseverance. I think the replacement slugs were not meant for this TV as I had to adjust basically every coil in the IF and audio sections. A LOT of trial and error! This took me hours to get the picture you see in the video!

But it locks solid. The audio crosstalk is basically gone. It's not perfectly aligned, but it's way, way better than when I found it!

And I have further evidence that this set is not a high hour set, despite the worn buttons. The Screen control on the back of the CRT had plenty of room left on it. I don't think it was ever touched.

Screen controls at factory default, plenty of room left on the drive and bias controls... I think I have a pretty good CRT here.

So... Now that I have this thing fixed, or at least as fixed as I'm going to make it... I am going to do what we used to do with console TV's back when i was a kid:

It's going to go up against a wall, I'm going to put a towel over the top, and use it as a table to set stuff on. Occasionally I'll plug it in and turn it on to remind myself that yes, I diagnosed and fixed this damn thing, and documented that the tuning slugs in CTC 120's can crumble into dust.
Reply With Quote