Quote:
Originally Posted by liammc00
Thanks I don't think I have any caps that go up to that high of voltage on hand at the moment but once I find what value the set takes I will order it. I have a RCA from 1991 and it has very washed out picture I thought screen control was to high but before I mess with screen I will check the 200v filter as to my knowledge no one has ever touched the screen control.
|
The RCA cap may be part of a big 2 section filter can. Just cut off the wire & make a flying splice with a new one.
The cap is almost always either a 4.7 mfd or 10 mfd. Use a 350 or 450 volt.
temp 100 degree C.
Zeno