Quote:
Originally Posted by blue lander
Thanks! I don't have a variac, could I use a light bulb in series with the power cable for the same effect?
I looked up the part number on the bottom of the chassis, it's a TS-969 apparently.
https://www.worldradiohistory.com/Ar...TD-1980-06.pdf
A schematic for the board is on page 58 |
Shure dim bulb it. You should also pull the back & find the horz out transistor.
Then fire it up for a few seconds. Un power & feel the transistor & see if it gets hot. If so dont go further. If cool do again for 10 sec, 30 sec etc. That will get you started.
Zeno